Περιγραφή:
4.1 Channel Digital Sound Processor (DSP) with Powered Subwoofer - PWD-X5
ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
Achieving a perfectly integrated, high-performance car audio installation with only one device is now possible with the new Alpine PWD-X5.
- This very unique sound system upgrade product includes a high-performance Digital Sound Processor (DSP), 4-channel amplifier for your front and rear door speakers, as well as an ultra-flat active subwoofer.
- The small footprint allows the PWD-X5 to be easily installed inside the car’s cabin to enjoy a nice bass upgrade.
- Connect either OEM radios via high-power speaker level inputs or aftermarket radio via RCA inputs, and control the system through the wired remote control and the convenient smartphone app.
- This product is perfect for customers that look for a big improvement of their car’s sound quality, without installing many different devices and routing cables all across their car.
- The PWD-X5 comes with a full wiring kit including high-qulaity power cables (4.5 meters) with main fuse.
All-in-one sound upgrade
- The PWD-X5 features a Digital Sound Processor (DSP), compact powered subwoofer and a 4-channel amplifier - all in one box.
- This is perfect for smaller vehicles and customers who do not want to install many different devices in their car.
- The built-in amplifier delivers 4 x 50 Watts for the speaker channels and 240 Watts for the built-in subwoofer (peak power).
- Installation brackets and a wiring kit are included in the set.
Compact installation
- The very compact measurement of only 350mm length x 245mm width x 80mm height allows the PWD-X5 to be installed under the front seats of many vehicles.
- It can be also easily installed in the trunk of hatchback or coupe cars. The total weight of the product is just above 5kg.
Extensive sound tuning functions
- Use the built-in 10-band Parametric EQ, digital time correction and digital crossover to tune the sound of your vehicle.
- You can do the main setup by connecting a PC using the free Alpine software or via the included wired controller.
- There is also a smartphone app that allows users to switch between pre-sets on the go and adjust subwoofer and volume levels.
Wide connectivity options
- You can connect the PWD-X5 to an Aftermarket radio using RCA inputs.
- If you have an original radio in your car that has nor RCA connections, you can connect it to the DSP amplifier using the high-power inputs.
- There are also 2 USB ports used for the included external Bluetooth dongle and to connect the wired remote control and PC for setup.
Wired Remote Control
- The remote control unit is connected with the DSP amplifier by USB. Use the rotary encoder to select pre-sets, input sources, sound settings and more.
Bluetooth Audio Streaming
- If your original car stereo does not feature Bluetooth audio streaming, the PWD-X5 is yet again a great solution for you.
- With the included Bluetooth dongle that can be plugged in to one of the USB ports on the DSP amp you can stream music from your smartphone to the PWD-X5.
- Simply pair your phone and select Bluetooth as a source in the wired remote controller to enjoy all your music, Spotify and internet radio on your sound system.
Get the Smartphone App
- You can download the Alpine companion app for the PWD-X5 from Google Play and the Apple App Store free of charge.
- This app allows you to set the master volume and subwoofer level, select sound pre-sets, switch audio input sources, adjust the 10-band Parametric EQ, Crossover, Fader/Balance and much more.
ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
- Power output:
- Rated power: 25W*4+165W;
- peak power: 50W*4+240W
- Signal-to-noise ratio: ≥80dB
- Bass boost: -12dB~+12dB
- Frequency response: 20Hz~20KHz
- Input impedance: Low-level input: 20KΩ; high-level input: 100Ω
- Phase selection: 0°/180°
- Remote ON: DC high-level /REM input activation
- Operating temperature: -10~60°C
- Storage temperature: -40~85°C
- Power source: DC 14.4V (9V~16V) negative ground
- Activate REM input: Options of high-level activation (H1+/H3+) and ACC activation for selection
- Activate REM output: +12V activation voltage output (0.5A)
- Stand-by current: 750mA
- Net weight: 5.35kg
- Measurements: 350mm (L) *245mm (W) *80mm (H)
Functional Parameters
- Type of input signals: 4-channel high-level, 4-channel stereophonic low-level, Bluetooth
- Output position: 4-channel amplifier output (4Ω 25W*4)
- Output signal gain:
- Master volume: 0~35;
- Subwoofer volume: 0~15
- Filter slope:
- CH1~CH4 6 dB/Oct or 12dB/Oct
- CH5 6/12/18/24dB/Oct
- Q value: 0.404~28.85
- Delay: 0.000~5.4ms/0.000~187cm
- PreSets: 15 presets selectable