Περιγραφή:
6-1/2" (16.5cm) Component 2-Way X-Series Speakers - X-S65C
ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
Alpine Sound ID
- Alpine’s top sound engineers from all over the world gathered in the Alpine Iwaki, Japan headquarters to critically evaluate in-car sound from aftermarket and high-end factory systems.
- While many of these systems were able to perform with wide dynamic range and at sufficient volume levels, there was a lack of reality of instruments, but most predominantly in most systems, a lack of spatial imaging.
- As a result, Alpine ID was born to address this need.
- Alpine ID, which stands for “Alpine: Image Defined,” is Alpine’s new global philosophy with an evolutionary approach for solving what’s missing in most car audio systems these days: great spatial imaging and depth of stage.
- The Alpine ID philosophy centers on developing matched sound systems that work together to create a highly realistic sound stage with great dynamic range (Hi-Res Audio) and sound quality. The matched sound system components allow the listener to experience a new level of realism and engagement while enjoying music in their vehicle. In other words, the listener can experience the music as the artist originally intended.
- The X-Series speakers, amplifiers, and subwoofers create the foundation of sound system components that will feature Alpine’s new sound philosophy.
Great Installability
- Alpine uses high-power neodymium magnets for the new X-Series speakers.
- This means the magnet can be much smaller compared to traditional speaker designs, allowing for a much lower mounting depth and overall space requirement inside the car door.
All New Motor Structure
- By using a powerful Neodymium magnet in a radial configuration, we could achieve a very compact motor assembly for a high vehicle compatibility rate.
- The radial magnet configuration drastically increases magnetic efficiency – resulting in high dynamic and power handling.
HAMR Surround
- The High Amplitude Multi-Roll (HAMR) surround allows a maximum, linear cone excursion for high SPL, while maintaining full control over the diaphragm at any excursion stage for highest sound clarity.
Included Mesh Grill
- We included a metal mesh grill to protect the woofer in open installations.
X-Series Motor Linearity
- We needed to create a speaker with balanced motor force throughout its operating range of motion.
- A balanced force factor curve should look identical / mirrored when the cone moves in or out. The Alpine X-Series speakers offer excellent linearity for highest clarity.
Nano-Fibre Cone
- The small-diameter nano-fibers create a cone structure that is lightweight and rigid, for increased sound accuracy.
- Nano-fiber cones also have good internal damping, so residual energy decays quickly without distorting the original music tones.
X-Series Speakers Frequency Response
- We aimed to create a speaker system with extended high frequency response to faithfully reproduce the sound stage and the harmonic details of the music.
New Carbon Graphite Tweeter
- Alpine chose carbon graphite for the tweeter because it is rigid enough to perform like a hard dome tweeter but maintains the natural sound characteristics of a soft dome tweeter.
- The tweeter delivers increased accuracy and extended high frequency range (up to 40kHz) without the harshness that is sometimes associated with hard dome tweeters.
- This allows listeners to enjoy true Hi-Res Audio sound quality.
Network Design (X-S65C and X-S65 only)
- The super compact network slides open so you can easily gain access to the adjustment jumpers.
- You can adjust the tweeter level in 3 steps (-3 / 0 / +3 dB) and the tweeter phase (normal / reverse).
ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
Tweeter
- 1′′ (2.5cm) Hard Dome Carbon Graphite Tweeter
- Neodymium Magnet
- Surface Mount Application
Woofer
- Nano-Fibre Cone
- Radial Ring Magnet Design
- HAMR Surround
- Large 35mm Voice Coil
- Ultra High Density Neodymium Magnet
- Shallow Mounting Design
Network (X-S65C and X-S69C only)
- Compact design for easy installation
- In-line Network Design
- Tweeter level Adjustment: 3 Steps (-3, 0, +3dB)
- Phase adjustment (normal / reverse)
- High Grade Network Components
SPECIFICATIONS
Power Handling
- Peak Power: 360 Watts
- RMS Power: 120 Watts
Dimensions
- Woofer Mounting Diameter: 137 mm
- Woofer Mounting Depth: 59 mm
- Crossover Size : 45 x 70 x 30 mm
General
- Frequency Response: 55 Hz - 50 kHz
- Impedance: 4 Ohms
- Recommended Amplification : 120 W RMS, per Channel
- Sensitivity : 89dB / W (1m)